> See all Guides 
It may surprise EV newbies to learn that an electric car’s charger is found on board the vehicle. It’s the equipment buried in the guts of the car that takes an AC source of juice from your house, and converts it to DC—so your car’s battery pack can be charged.
This fact doesn’t stop nearly everybody from calling the wall-mounted box that supplies 240 volts of electricity a “charger.” Actually, that box, cord and plug has a technical name—Electric Vehicle Service Equipment or EVSE—and if you have an EV, you’re going to want to install one at home.
So, it’s slightly misleading to say we’re providing guidance about chargers, because we’re really talking about buying an EVSE—which is essentially no more than an electrical device allowing drivers to safely connect an electric car to a 240-volt source of electricity. It’s not rocket science, and you should not overthink the selection and installation of an EVSE.
That said, there are important differences between the various home chargers (uh, I mean EVSEs). And there are a few best practices to keep in mind.
The general consensus among experienced EV drivers is that a capable and durable EVSE will cost around $600 to $700. You could spend a little bit less, or twice as much, but that’s the ballpark. This does not include installation. Read on to see which key features—such as portability and connectivity—can send the price higher, or can be avoided to reduce the cost.
By the way, from 2010 through early 2013, many EV drivers could get a free EVSE, courtesy of The EV Project, a program sponsored by the U.S. Department of Energy. But as of March 11, 2013, the program reached its threshold for handing out residential charging equipment, so no more freebies—you’ll need to buy one on your own.
You should buy an EVSE that can handle at least 30 amps. The rule of thumb is that 30-amp service will roughly give you the ability to add 30 miles of range in an hour—just as 15 amps will add about 15 miles in an hour of charging. (These range numbers are somewhat optimistic.)
Keep in mind that most plug-in hybrids (and the Nissan LEAF prior to the 2013 model) don’t take full advantage of the faster rate. That’s okay. It’s still wise to have the capacity to charge at least at the 30-amp level, even if your current car can't fully utilize the higher amperage, so you don’t have to upgrade in a few years if/when you buy a new EV that has a faster on-board charger. Also, it’s nice to allow friends with faster-charging EVs to get a full charge from your garage.
Note: A 30-amp EVSE will need a circuit breaker rated for at least 40 amps.
Before you buy an EVSE, imagine where your electric car will be parked. Think about the ideal location for this piece of equipment. Now measure the distance between where the EVSE will hang on your wall, and where the charging port is on your car. Cables usually run from approximately 15 to 25 feet. Make sure your cord can easily reach where it needs to go, and think about its length for a potential second plug-in car in your driveway or garage.
Depending on where you locate your EVSE, an electrician might have to run just a few feet of conduit—or dozens of feet. Longer copper runs will add installation cost, but because you’ll charge almost every night, you want it to be as convenient as possible.
If it’s possible, don’t permanently install your EVSE. In other words, have an electrician install a NEMA 14-50 outlet or something similar (types of outlets used for things like clothes dryers). Then put a matching plug on a pigtail mounted to your EVSE. You can then mount your EVSE right next to the outlet, and simply plug it in. If the time comes when you move, or decide to relocate your EVSE, simply unplug it—and plug it back into another NEMA 14-50 outlet.
This approach costs exactly the same as a hard-wire installation, and makes the device instantly moveable without additional expense. If your EVSE is outside—because maybe you don’t have a garage—then local code might require that you hard-wire the charging equipment. Otherwise, keep your options open.
In this age of smart phones, smart grids, smart this and smart that, you might feel compelled to buy a Wi-Fi-enabled EVSE. That might not be so smart after all. While these fancier products sound cool because they have timers, meters, touch screens and capabilities for monitoring and changing charging events over the web, most long-time EV drivers believe that connectivity adds unnecessary complexity, as well as cost. In some cases, when connectivity is lost, the EVSE can shut down. Besides, many of these remote controllable features are available directly on the car, or from mobile applications. So, the smart money is on dumb but durable EVSEs.
If tracking electricity usage of your EV (for work or tax purposes) is an absolute must, you'll want to either meter your charging separately, or keep your eye open for add-on devices that perform this function via integration with the smart grid. These solutions are currently being evaluated in pilot projects.
Okay, we’re finally ready to talk about specific EVSEs. There are at least a dozen different manufacturers, but we won’t cover all of them in detail. Instead, we’ll focus on the EVSEs most highly recommended by the EV intelligentsia. We’ll also briefly mention a few others worth considering.
When we reached out to experienced EV drivers, nearly all of them put ClipperCreek equipment at the top of their list. The company has been making these units for more than 15 years. Their equipment doesn’t necessarily get the highest marks for aesthetics, but the same words keep coming up in those recommendations: durable, robust, and even indestructible. No screens, no software, no problems. Recently, ClipperCreek came out with a more affordable unit, well-suited to private garages: the HCS-40. It has a compact size, a 32-amp limit, a 25-foot cord and starts at $565. It's also available with a NEMA 14-50 or 6-50 plug (great for charging at RV parks) for $589.
JuiceBox Pro 40 is a smart, WiFi-connected 10-kW Level 2 charging station. It’s currently priced at $599. Electric Motor Werks, the manufacturer based in San Carlos, Calif., is offering this charging station as a pre-configured 40-amp unit, supplied with a 24-foot J1772 cable and a six-foot input cable with 14-50P plug. The chief benefit—beyond its lower price point—is the connectivity and software-upgradability of the charging station. This model comes with WiFi connectivity, energy metering, scheduling, notifications, smartphone app, and it's ready to adapt with future enhancements being dreamed up by the developer.
As an alternative to ClipperCreek, you could opt for the slightly less revered AV charging station. It has about the same specs and footprint, and a nicer cord handling system that wraps around the unit. Some reviewers feel it’s a bit cheaper in feel. Aerovironment offers a full-service installation program, better user guides and documentation and a three-year warranty. The hard-wired version starts at $999, with portable versions dropping to $899 for a 25-foot cord, and $799 with a 15-foot cord, both allowing for the portability discussed above.
Buy on amazon.com .
If portability is your most desired feature, then AeroVironment’s TurboCord 240-volt charger might be the charger for you. It’s compact, light, and very portable. The $499 TurboCord is a compelling alternative to wall-mounted boxes, especially charging a plug-in hybrid. It makes its easier and cheaper to set up a home or and workplace charger. Simply install a 6-20R socket and plug in the TurboCord. The Turbocord gets generally high ratings, especially for low cost and portability, although some customers have complained about product failure over time.
Buy on amazon.com .
Manufactured by Schneider, a well-established brand associated with Square D products, the 30-amp Level 2 charger hits the competitive purchase price of $600, while earning consistently high rankings from EV drivers. While some mention that the body is made of relatively cheap plastic, nearly all owners believe that’s a minor issue, because the unit is effective, reliable and affordable. Its low-depth (it doesn’t protrude far from the wall) and overall small size mean that it doesn’t take up any more room than necessary. This unit is available below from Amazon as well as from Home Depot, which provides free in-home consultations about installation.
Buy on amazon.com .
At an attractive price of $499, the Siemens 30-amp Level 2 charger, which is compatible with all current electric cars,
gets very high rankings from consumers. It has a high-quality German-built finish, good cable management, and is smaller and lighter than some competing products. Its 20-foot cord is adequate, and users appreciated the “charge-delay” function. In the past, some customers have complained about poor customer service, but those instances are rare. Besides, Siemens offers a strong three-year warranty.
Buy on amazon.com .
Evr-Green E30 is hardwired and offers an 18' charging cable. It's a high-quality product and well-designed but carries a slightly higher cost. With a smaller customer base, there are fewer customer reviews available to verify its performance.
Buy on amazon.com .
There’s some debate about whether or not you should use a contractor referred by your dealership. The general view is that any qualified electrician can handle the installation, and that you’ll avoid premiums charged by so-called EV installation specialists. The key is if you can absolutely identify a skilled electrician—because a bad electrician can mess up the job.
EV owners who aren't certain of their ability to judge the quality of an electrician are advised to go with a manufacturer's recommended certified installer.
The cost of installation will vary depending on installation quality, distance that wires and conduits need to run from the breaker box (a.k.a. service panel) to the EVSE, and labor rates of the electrician. Some jobs can cost as little as $200, if the EVSE is mounted next to the breaker box. Or the installation can run as much as several thousand dollars if a conduit needs to be run from another part of the house, or if new or upgraded electrical service is required at your home.
DIY is a low-cost installation option, with a big caveat: don’t take on this job if you don’t know what you are doing. It can be dangerous. Besides, local codes may require permits and inspections to be carried out on your EVSE installation.
As long as we’re talking about DIY alternatives, some EV drivers swear by low cost alternatives from these groups:
One last note: Keep your receipts. In some locations, the cost of an EVSE and installation qualifies for state or local incentives.
Thanks to all the EV experts who contributed to this article. We encourage you to add your own feedback and guidance in the comments below, and we will continue to make revisions based on new information and products.